Temperatures are on the rise, and it's time to review safety protocols when it comes to overheating. Thanks to our Safety Coordinator, Conner LaLonde, for sharing these watch signs from the National Safety Council with our team this week!

HEAT RASH 

Look for: red inflammation of the skin. 

What to do: Remove unnecessary clothing. Do not apply creams or lotions as these could trap heat.

HEAT CRAMPS

Look for: painful muscle cramping or spasms. 

What to do: Remove worker from heat, provide water to sip, gently stretch muscle.

HEAT EXHAUSTION 

Look for: weakness, dizziness, nausea, headache, heavy sweating, clammy skin. 

What to do: Remove worker from heat, give up to one liter of water (unless they are vomiting). Cool worker with cold, wet cloths and fan.

HEAT STROKE 

Look for: Rapid pulse, no sweating, confusion or unconsciousness. 

What to do: Call for medical help immediately. Do not administer any liquids if unconscious.

“Comfort” is an interesting word that we use a lot at Cambridge.  Since we are an HVAC company, it is usually in context with making sure the people in your industrial facility are breathing fresh, tempered air, or making sure that your employees in high-bay buildings aren’t freezing in the dead of winter. There’s also “comfort” in the realm of making sure your employees know that you’ve got their backs and have a genuine interest in their personal health and professional growth.  (see blogs on Dale Carnegie Leadership Training and Stretching Your Way to Workplace Safety to generate ideas of how to boost comfort both personally and professionally).
 

Still, most companies overlook the importance of physical employee comfort, and are losing real talent and real opportunity to grow with those employees when they leave to pursue a workplace that can meet and exceed their basic requirements of a healthy working environment.
 

Not convinced? Here are four reasons that we think will back us up.
 

Safety protocol alone is reason enough.

According to OSHA – your workers have the right to working conditions that do not pose a risk of serious harm.  The OSHA website starts with a dire warning: “The quality of indoor air inside … workplaces is important not only for workers' comfort but also for their health. Poor indoor air quality (IAQ) has been tied to symptoms like headaches, fatigue, trouble concentrating, and irritation of the eyes, nose, throat and lungs.” This safety protocol is actually far, far above a “comfort” suggestion – and could be downright dangerous if ignored.
 

And even though we could stop after the safety reason, here are three more reasons to consider:
 

You can’t exist without them.

Unless you are a completely automated company or self-employed, you depend on at least one employee to get your product or service sold, produced, billed, you name it. Employees know that they have employment options – especially in trade professions, where there is a serious labor shortage. Don’t doubt that even if an employee feels fairly compensated, they might still leave because of continuing discomfort in their workspace.
 


 

Continuous improvement falls apart when it’s not the priority.

Imagine a humid July day in a distribution facility, when you can’t imagine doing anything but cooling off. We spend a portion of every day identifying opportunities for lean improvement in our processes and workspaces, but even we know that these can fall by the wayside when it is just too hot or too cold.
 

They are your brand ambassadors.

Client services to your customer.

Seasoned laborers to new hires.

Any employee to the world on social media.

Your employees can and should be your biggest advocates, because they are treated right (and physical comfort plays a big role) and believe in your product or service. The opposite of these two things can destroy every sales opportunity on your books this year.

There are so many ways to make your team feel comfortable – and they deserve it, so make it a priority to figure out the right investment to provide them a workspace in which they can reach their full potential.

Though the practice of scrum is fairly new to Cambridge (has only been actively applied in three of our 56 year existence) it has already helped us formulate a new approach to goal setting and how we will ultimately achieve those goals. More importantly, we are using it to address safety practices and protocols within Cambridge, so that every one of our fellow employees makes it home at the end of the day.

After being introduced to the scrum concept (grouping agile thinkers together that stress constant communication to achieve complicated tasks and goals) in J.J. Sutherland’s book Scrum: The Art of Doing Twice the Work in Half the Time, a group of Cambridge engineers volunteered to be trained in the practice by Toyota scrum expert Nigel Thurlow and apply it within the Cambridge walls, thus becoming our first four certified Scrum Masters. See their story and how their daily work has changed over the past few years.

To catch a glimpse of Nigel Thurlow’s on-site scrum training at Cambridge - make sure to check out our blog on his visit!

This blog was guest-written by Meg Brown, Director of HR at Cambridge Engineering. 

The goal was 10 applicants for each opening. In a tight labor market? There’s no question: this is the most difficult time to build engaged teams in a generation. There are so many interests competing for attention. From finding workers, to upskilling them -- how can we make sure we attract the right people in the first place? We’d have to be crazy to attempt it!   

Then call us crazy because we have supersized our recruitment pipelines and enabled historically low turnover. Through a combination of people-centric leadership and innovative recruiting/development programs, we have redefined the employer/employee relationship. 

Allow me to explain. 

Cambridge doubles production in the 3rd and 4th quarter, especially on our S-Series HTHV heaters, which naturally coincide with the colder weather. For many years we have surged with seasonal employees who spend 4-6 months working for Cambridge through our busy season. A few years ago we began hiring for cultural fit over experience, believing we can provide thorough in-house training. While that helped, we were still struggling to find talent quickly enough using staffing agencies to help bridge the gap. In 2018 with the crazy goal of 10 applicants for every opening the message was clear - we had to find a new approach to attract and retain talent.     

Enter Cambridge Unleashed. 

We realized there is real value in spending time at Cambridge - even if it is only for a short period of time. So we created Cambridge Unleashed, a new concept which allowed us to start telling our story - describing the value working here can bring to each and every one of us. This program is intended for anyone interested in learning, leading and launching their manufacturing career. 

Reading 2-Second Lean by Paul Akers is a conscious step we require for all full-time and seasonal workers. This continuous improvement methodology reinforces autonomy for each person to make their work processes, and by extension, their jobs better and easier. 2-Second Lean, though, follows each person home and extends beyond the walls of Cambridge. We hear time and again how someone recognized waste or something that bugged them at home and exclaimed “Hey, that’s a lean improvement!” Exposure and practice of this mentality is quick and effective, and can help a person make their own experiences better for their rest of their lives.

We’ve found that when our 20 “Unleashers” dove into the given opportunities they end up unlocking their potential, feeling appreciated and in control of their own workspace. Here are some real life examples:

  • Many Unleashers found courage they didn’t know they had and volunteered to emcee the morning meeting. 
  • Our team reached a company record breaking production level of 13 units a day.  
  • All 20 Unleashers jumped into our lean system making videos showing highlights of their improvements. 
  • Zero lost-time accidents through the entire busy season.

You might be wondering what happens at the end of the program? Where do these seasonal employees go after Unleashed? 

We realized quickly that if Cambridge Unleashed is a program for anyone who wants to launch their manufacturing career, then we had better figure out how to do it.  Many of our Unleashers came into Cambridge having never worked in manufacturing, and after 4-6 months with us they had learned the daily habits necessary to be a dedicated lifelong continuous improvement/lean maniac. What company wouldn’t want to hire them?!? We just had to figure out a way to tell their story. So we used video – a well loved tool often used at Cambridge. 

We created a launching process which allowed us to work with our Unleashers to determine their best next step at the end of the program.  Did they want to apply for our open positions and launch internally or did they want to look for a job somewhere else launching externally? Either way we were in it with them every step of the way. Those interested in internal launch applied for those openings, completed an interview process and were considered for any openings available. Those interested in external launch worked closely with us to create an introduction and highlight video they could use when they applied to other companies. We helped them update their resumes, adding a link to their video so any recruiter could see the amazing work they had done at Cambridge. Then to help get the word out we blasted their videos to our entire network, letting them know we had some Unleashed graduates who were seeking employment. 

All in all, we launched all 20 Unleashers into positions they are excited to have, many here at Cambridge and a few elsewhere. We smashed the goal – achieving an average of 20 applicants for each opening!   We are beyond thrilled with the results of Cambridge Unleashed. Can’t wait to do it again in 2019!

 

Bringing #GloryandDignity back to manufacturing.

It’s an aspirational concept, one that you might not associate with manufacturing. We see it every day, though, through the companies that share their stories with us when they visit our facility or our colleagues at trade events. The goal of lifting our industry to a higher standard by giving back to the community and to employees might not be intrinsic to all leaders - yet, more and more, we see shining examples of our friends in this business doing just that.

  • The Seating Matters team is generating tools and resources to save lives before and after pressure injuries through an Injury Prevention Program aimed at correct seating, training, maintenance and education of staff.
  • BCI is providing high-quality packaging solutions to their customers through a system of creating meaningful employment and skills training for 250 adults with disabilities.
  • A structure of independent and interdependent teams at Vibco allows individuals valued for their strengths to complement and grow with each other while working toward the same mission.
  • FastCap continues to share their own manufacturing improvement ideas through 2 Second Lean to inspire other organizations or to even just provide a simple solution to a problem they might be facing.

We see it every day, though some might not associate these amazing achievements with what they are ultimately doing for manufacturing. At Cambridge, we’ve found that one of the easiest ways to recognize both glory and dignity within our own organization is through celebration.

Remembering to fête the lines’ extraordinary output when we hit a 13 unit/day output (up from 8-9 units/day) while maintaining quality standards was essential. The service team is constantly praised by our contractor partners for their diligence and assistance through any issue in the field.  The engineering department’s behind-the-scenes work designing custom, yet simple, solutions for our end users deserves its own standing ovation. Each Cambridge employee embodies the dignity factor, and as a whole, they bring glory to their work, our company, and the manufacturing industry. 

Watch John’s speech from 2017 that helped us realize the #gloryanddignity mission!