CJ Automotive Retrofits Antiquated Heating Equipment with New HTHV Technology

Problem:

CJ Automotive, a manufacturer in Indiana, needed to replace their inefficient unit heaters that were used to heat their 126,000 s/f manufacturing and distribution facility. The aging boiler system didn’t provide a comfortable working environment for employees and generated excessive utility bills during the winter heating months. Compounding the problem was the fact that the installation of any new heating system, no matter what time of the year, needed to occur during production hours with zero tolerance for negative impact on the production line.

CJ Automotives’s two main requirements for a new system was one; to lower their monthly heating costs and two; provide a more comfortable working environment for their employees during the winter months all while meeting their ROI requirements.

Solution:

Cambridge Engineering, with the help of their regional manufacturer’s representative B&B Energy, worked with CJ Automotive to design a solution that would not only meet their needs but exceed their ROI requirements. The team presented CJ Automotive with a leading edge heating technology solution called High Temperature Heating and Ventilation (HTHV) manufactured by Cambridge Engineering. The HTHV technology, a 92% efficient direct fired technology, is designed to provide three main benefits:

  1. Lower utility costs – as a 92% thermal efficient solution the HTHV technology would dramatically lower their utility costs when compared to the older outdated and inefficient boiler equipment. HTHV technology has a minimum discharge temperature of 150°F. It is because of this higher discharge temperature that HTHV technologies are able to heat structures using less natural gas than other less efficient products.
  2. Provide even temperatures throughout the facility trough better destratification – the HTHV technology, with its high static blower, provides better air destratification without the use of external destrafication fans. Even in high bay buildings with ceiling heights of 30 feet or greater the temperature difference from ceiling to floor is no greater than 4 degrees.
  3. Provide better indoor air quality – because HTHV technology uses 100% outside air the technology is also a ventilation device as well as a heating solution. More outside air means better indoor air quality for the occupants. Buildings don’t need to breath but people do.

As part of the process Cambridge Engineering, the local mechanical contractor and Manufacturing rep met with CJ Automotive to conduct a site survey to ensure that the solution provided would meet their energy use, comfort and ROI requirements. The survey included an energy use analysis comparing the new HTHV equipment to the old boiler equipment. The main goal of the analysis was to provide the team with the information needed to estimate the potential energy savings from moving to the new HTHV technology. The site survey also provided the necessary information to calculate the heat load required to heat the facility. It was determined that three separate Cambridge HTHV units….one SA 250, one S800, and one S2200, would be required and that CJ Automotive could realize a 20% savings on their utility bills. The HTHV equipment would also qualify for commercial rebates through their natural gas utility provider which would help them on equipment costs and their ROI.

In addition to the estimated gas savings and the utility rebates for the equipment the solution was designed so that there would be no disruption to the production line.

Fast Forward to 2016:

After completion of the project CJ Automotive has been able to not only achieve but exceed their goals from the heating retrofit project:

Reduce Utility Costs:

*January, February, and March make up 80% of CJ Automotive’s heating requirements

Improve Workforce Comfort

Even as impressive as the utility savings are what’s even more impressive is that CJ Automotive’ s thermostat setting went from 55°F with their old system to 68°F using the new system. The workforce now has an environment where they no longer need to worry about uncomfortable surroundings. Instead they have even comfortable temperatures from their head to their toes….an exceptional work environment and lower utility bills has made every satisfied.

Return on Investment

With the dramatic savings in energy costs, the utility rebates they received, the fact that they were able to cut over 4 man hours/day in maintenance and repairs to the old boiler, and remove thousands of dollars in annual boiler inspection fees CJ Automotive was able beat their stated ROI requirements for the project.

For more information on how HTHV technology can help you reduce your heating costs visit, click here to schedule an appointment.